Grass Valley LUMO Series - Manual (Page 60)

52
SFP Modules
Installing an SFP module
Installing an SFP module
1 Make sure that the bale clasp lever is in the closed position
2 Position the SFP module so that the recessed
slot is lined up with the tab side of the socket.
3 Slide the module straight into the socket, and
push gently until it clicks into position.
Connecting the fiber optic cables
1 Remove the dust plug from the SFP module if present
2 Verify that the exposed end of the optical fiber in the LC connector is clean
3 Carefully remove any debris if necessary.
4 Plug the LC-terminated fiber optic cable into the SFP module