Fio-911-4th-cwwcxxcyyczz-lc, Card-front status leds – Grass Valley LUMO Series User Manual
Page 47
39
LUMO
User Manual
Card-Front Status LEDs
These LEDs monitor the status of the electrical inputs to the FIO-911 Quad Tx:
•
Green
= SDI signal OK
•
Yellow
= No lock
•
Red
= No signal
•
Flashing Red = SFP not present, or SFP not detected, or hardware failure
FIO-911-4TH-CwwCxxCyyCzz-LC
High Power Quad 3 Gbps/HD/SD Optical CWDM Transmitter
with LC/PC connector
This variant utilizes two dual high-power CWDM optical transmitters at its outputs to send four
channels, each of which enters on a rear-panel DIN, is equalized, reclocked, E-to-O converted,
and sent to the SFP transmitter. For the DIN frame only, each electrical input is also reclocked
and sent to the matching electrical output on the rear panel.
The two signals entering each CWDM transmitter module are modulated at different
wavelengths.
The model number for this device identifies the two included SFP high-power CWDM trans-
mitter modules by specifying the wavelengths of their output:
C27C29
1271/1291
Light Purple
C31C33
1311/1331
Yellow Green
C35C37
1351/1371
Pink
C39C41
1391/1411
White
C43C45
1431/1451
Black
C47C49
1471/1491
Gray
C51C53
1511/1531
Blue
C55C57
1551/1571
Yellow
C59C61
1591/1611
Red
Note that both SFP modules can operate at the same wavelengths.
CwwCxx and CyyCzz
Wavelength (nm)
Color Code