Grass Valley LUMO Series - Manual (Page 37)

29
LUMO
User Manual
-or-
Click the Select All box at the top to activate the feature for all slots in the frame.
Click Save to controller at the bottom to
copy all restorable data from the cards in
the selected slots into the memory on
board the LUMO-CPU-ETH controller.
Click Load to cards to load the cards in the
selected slots with data from the
controller’s memory. Note that a data
restore will only work if the card in the slot
is the same type as the card that was there
when the data was saved.
For automatic restore and save:
Click the Restore Point button and view the Config tab.
Restore: The LUMO-CPU-ETH card can
be set up to automatically update a card
when it is inserted in a slot previously
occupied by a card of the same type
whose data was saved. Thus, a new card
can be configured automatically to
replace the card that was removed,
saving a lot of time when cards are
swapped.
Click the Default Action box to enable
the auto restore function for all the cards
in the frame.
Save: The LUMO-CPU-ETH card can be
configured to automatically back up the
data on the cards in its slots according to
a set schedule.
Click the Auto Save box to enable the
automatic save function.