Fio-911-4r-lc, Description, Installing cards and sfp modules – Grass Valley LUMO Series User Manual
Page 44
36
FIO-911 O/E and E/O Converters
FIO-911-4R-LC
•
Presence/loss of signal alarm – iControl, on-board LED for presence
•
SFP Optical power monitoring and report
•
Internal SFP temperature alarms on the iControl interface
•
SFP Module type detection and card configuration
•
Remote monitoring and control
•
Convenient front-loading design, SFP on the front of the card
•
The cards and the SFP modules are fully hot swappable
Description
The FIO-911 card incorporates two SFP module slots on its front panel. Each slot has two dedi-
cated status LEDs. The front panel also incorporates ventilation slots, a handle used to remove
the card from its slot in the LUMO frame, and a captive screw to secure it in position.
Within the frame, the card connects to intra-frame data and power busses, and to the connec-
tors (four BNC or eight DIN) dedicated to its slot on the frame’s rear.
The front panel of the card is labeled to identify the FIO variant, and each status LED is labeled.
The function of the rear-panel connectors depends on the FIO-911 variant that is installed, and
is identified by a lexan that slips over the connectors on the rear panel. Lexans are supplied for
both -BNC and -DIN versions of the frame.
Installing cards and SFP modules
See
Installing Cards in the LUMO Frame
on page 8 for detailed instructions for installing the FIO-
911 cards in the LUMO frame.
See
on page 51 for instructions on removing and installing SFP modules into the
FIO-911 front panel slots.
FIO-911-4R-LC
Quad 3 Gbps/HD/SD Optical Receiver with LC/PC Connector
This variant utilizes two dual optical receivers at its inputs to receive four channels, each of
which is O-to-E converted, reclocked and sent to the outputs (one BNC or two DIN) on the rear
panel of the housing frame.
The FIO-911-4R-LC Quad Receiver includes two SFP-RR-LC modules.All receiver channels are
wideband, responding to wavelengths ranging from1260 to 1620 nm, compatible with 1310 nm
and CWDM wavelengths.
The front panel and rear lexans (DIN and BNC) for this model are shown here: