Epson A794-D100 - Manual (Page 83)

A794 Owner’s Guide Chapter 6: Programming Information
March 1999 77
Select Or Cancel White/Black Reverse Print Mode
Turns on White/Black reverse printing mode. In White/Black reverse printing mode,
print dots and non-print dots are reversed, which means that white characters are
printed on a black background. When the White/Black reverse printing mode is
selected it is also applied to character spacing which is set by Right-Side Character
Spacing (ESC SP).
This command can be used with built-in characters and user-defined characters, but
does not affect the space between lines.
White/Black Reverse Print Mode does not affect bit image, downloaded bit image, bar
code, HRI characters, and spacing skipped by Horizontal Tab (HT), Set Absolute
Starting Position (ESC $), and Set Relative Print Position (ESC \).
ASCII GS B n
Hexadecimal 1D 42 n
Decimal 29 66 n
Value of n 0 = Off
1 = On
(When 0 and 1 are the Least Significant Bit, LSB)
Default 0 (Off)
Exceptions
Only the lowest bit of n is valid.
Select or Cancel Smoothing Mode
This command is ignored.
ASCII GS b n
Hexadecimal 1D 62 n
Decimal 29 98 n