Epson A794-D100 - Manual (Page 82)

Chapter 6: Programming Information A794 Owner’s Guide
March 1999 76
Select International Character Set
See the previous command, Select Character Code Table (page 72)
Select or Cancel 90 Degree Clockwise Rotated Print
Rotates characters 90 degrees clockwise. The command remains in effect until the
printer is reset or until a Clear Printer (10) or Rotated Print (1B 12) command is
received. See Summary of Rotated Printing in this document.
ASCII ESC V n
Hexadecimal 1B 56 n
Decimal 27 86 n
Value of n 0 = Cancel
1 = Set
Default 0 (Cancel)
Select or Cancel Upside-Down Print Mode
Prints upside-down characters. The command may be combined with Clock Wise
Rotated print (1B 56) or Counter Clock Wise Rotated print (1B 12). The character order
is inverted in the buffer so text is readable. Only bit 0 is used. Bits 1-7 are not used. See
Summary of Rotated Printing in this document for more information.
ASCII ESC { n
Hexadecimal 1B 7B n
Decimal 27 123 n
Value of n 0 = Cancel
1 = Set
Default 0 (Cancel)
Exceptions
The command is valid only at the beginning of a line.
It cannot be used with right side up characters on the same line.