Epson A794-D100 - Manual (Page 79)

A794 Owner’s Guide Chapter 6: Programming Information
March 1999 73
Copy Character Set from ROM to RAM
Copies characters in the active ROM set to RAM. Use this command to re-initialize the
User-Defined Character Set.
ASCII ESC : 0 0 0
Hexadecimal 1B 3A 30 30 30
Decimal 27 58 0 0 0
Default current active ROM Code Page
Related Information
To modify characters in one of the character set variations, such as Rotated Print, Select
one of the Rotated Print commands, copy to RAM, then use the Define User-Defined
Character Set command (1B 26).
Cancel User-Defined Character
Cancels the pattern defined for the character code specified by n. After the user-defined
character is canceled, the corresponding pattern from current active ROM Code Page is
printed.
ASCII ESC ? n
Hexadecimal 1B 3F n
Decimal 27 63 n
Range of n 32-255
Exceptions
This command is ignored if n is out of range or if the user-defined character is not
defined.