beautypg.com

Epson A794-D100 User Manual

Page 64

background image

Chapter 6: Programming Information

A794 Owner’s Guide

March 1999

58

Set Line Spacing

Sets the line spacing to n/406 inch (n/16 mm).

The minimum line spacing is 8.5 lines per inch. The line spacing equals the character
height when n is too small.

If the Set Horizontal and Vertical Minimum Motion Units command (1D 50) is used to
change the horizontal and vertical minimum motion unit, the parameters of this
command (Set Line Spacing) will be interpreted accordingly.

ASCII

ESC 3 n

Hexadecimal

1B 33 n

Decimal

27 51 n

Value of n

n/406 inch

Range of n

0-255

Default

0.13 inch (3.37 mm)

Related Information

For more information, see the description of the Set Horizontal and Vertical Minimum
Motion Units command in this document.

Print and Feed Paper

Prints one line from the buffer and feeds the paper n/203 inch (n/8 mm). The line
height equals the character height when n is too small.

If the Set Horizontal and Vertical Minimum Motion Units command (1D 50) is used to
change the horizontal and vertical minimum motion units, the parameters of this
command (Print and Feed Paper) will be interpreted accordingly.

ASCII

ESC J n

Hexadecimal

1B 4A n

Decimal

27 74 n

Value of n

n/203 inch

Range of n

0-255

Related Information

For more information, see the description of the Set Horizontal and Vertical Minimum
Motion Units command in this document.