Epson A794-D100 - Manual (Page 74)

Chapter 6: Programming Information A794 Owner’s Guide
March 1999 68
Print Characteristics Commands
These commands control what the printed information looks like, selection of character
sets, definition of custom-defined characters, and setting of margins. The commands are
described in order of their hexadecimal codes.
Select Double-Wide Characters
Prints double-wide characters. The printer is reset to single-wide mode after a line has
been printed or the Clear Printer (10) command is received. Double-wide characters
may be used in the same line with single-wide characters.
ASCII DC2
Hexadecimal 12
Decimal 18
Exceptions
Double-wide characters may not be used in the same line with single or double-density
graphics.
Select Single-Wide Characters
Prints single-wide characters. Single-wide characters may be used in the same line with
double-wide characters.
ASCII DC3
Hexadecimal 13
Decimal 19
Exceptions
Single-wide characters may not be used in the same line with single or double-density
graphics.