Epson A794-D100 - Manual (Page 48)

Chapter 6: Programming Information A794 Owner’s Guide
March 1999 42
Commands control all operations and functions of the printer; from selecting the size
and placement of characters and graphics on the receipt to feeding and cutting the
paper. The operation of various printers may be emulated by the commands, including
the following:
♦
Axiohm A793
♦
Axiohm A794 Native Mode
♦
Axiohm APOS
♦
Epson TM-T88
Any of the commands may be used in any combination to program a host computer to
communicate with the printer (unless otherwise noted).
Some commands listed and described here may not be implemented. They will be
identified as not implemented. If received, they are ignored and not sent to the print
buffer as data. Any non-legal commands are sent to the print buffer as data.
List of Commands
Code (Hexadecimal) Command Page
09 Horizontal Tab 60
0A Print and Feed One Line 55
0C Print and Return to Standard Mode 112
0D Activate Carriage Return 55
10 Clear Printer 47
10 04 n Real Time Status Transmission 104
10 05 n Real Time Request to Printer 103
11 n1...n72 Print Raster Graphics 79
12 Select Double-Wide Characters 68
13 Select Single-Wide Characters 68
14 n Feed n Print Lines 55
15 n Feed n Dot Rows 56
16 n Add n Extra Dot Rows 56
17 Print 57
18 Cancel Print Data in Page Mode 112
19 Perform Full Knife Cut 47
1A Perform Partial Knife Cut 48
1B Download BMP Logo 79
1B 07 Generate Tone 48
1B 0C Print Data in Page Mode 113
1B 12 Select 90 Degree Counter-Clockwise Rotated Print 69
1B 14 n Set Column 57
1B 16 n Select Pitch (Column Width) 69
1B 20 n Set Right-Side Character Spacing 60
1B 21 n Select Print Mode 49
1B 24 n1 n2 Set Absolute Starting Position 61, 80