Epson A794-D100 - Manual (Page 58)

Chapter 6: Programming Information A794 Owner’s Guide
March 1999 52
Select Sensors to Stop Printing
Selects the paper sensor used to detect when the paper is out. The printer finishes
printing the current line and feeds the paper before stopping.
ASCII ESC c 4 n
Hexadecimal 1B 63 34 n
Decimal 27 99 52 n
Value of n Sensor status
Sensor Status
Bit Sensor 0 1
0 Receipt Paper Near-End Disabled Enabled
1 Receipt Paper Near-End Disabled Enabled
2-4 Undefined
6 Undefined
Bits 5 and 7 are not used.
Default 0
Enable or Disable Panel Button
Enables or disables the paper feed button by toggling the paper feed button on and off.
Only the lowest bit is used to toggle the paper feed button. If the last bit is 0, the paper
feed button is enabled. If the last bit is 1, the paper feed button is disabled.
ASCII ESC c 5 n
Hexadecimal 1B 63 35 n
Decimal 27 99 53 n
Value of n 0 = Enable
1 = Disable
Default 0 (Enable)
Exceptions
Functions that require the panel button cannot be used when it has been disabled with
this command.