beautypg.com

Audio input select web page – Grass Valley Kameleon HD Multi-Function Modules v.3.2.0 User Manual

Page 69

background image

KAM-HD-MULTI—Instruction Manual

69

Kameleon HD Links and Web Pages

Audio Input Select Web Page

Use
this
link

Use the Audio Input Select web page to define the eight audio streams from
the available audio inputs that will be sent to the Audio Sync web page for
delay adjustments.

The Audio Input Select web pages for each of the possible audio input and
output configurations are shown in the following figures:

8 inputs/0 outputs –

Figure 39 on page 70

4 inputs/4 outputs –

Figure 40 on page 71

0 inputs/8 outputs –

Figure 41 on page 71

Define Input Streams

Select the

Input Streams (1-4)

radio button in the

View Select

section to define

the first four input streams from the list of available audio inputs or

Force

Silence

. Use the

Input Streams (5-8)

to define the last four input streams in the

same manner.

Each stream selected has the following reporting functions and controls:

Input Status – reports the input stream as

Present

,

Not Present

, or

Silence

.

If a selected audio stream is not present, the Status LED on this page
will turn yellow. Audio status on the main Status web page will be indi-
cated as follows for each audio type:

When selected AES inputs are not present, the audio arrow indica-
tors on the module Status web page will be yellow.

When selected de-embedded audio inputs are not present, a textual
warning will be reported on the main Status web page.

Sample Rate Convert – enable or disable sample rate conversion for the
input stream with the

Disable

checkbox. Selecting Sample Rate Conver-

sion will correct and synchronize the audio sample rate to 48 kHz.

Note

Disabling sample rate conversion (SRC) for an audio stream will automati-
cally disable auto tracking for that stream.

Loss of Signal Reporting – select the

Report

checkbox to send the

reporting status of the input stream to report to higher levels (such as
the 2000NET module or NetCentral)

Reporting Status – displays what status is being reported to higher
levels. When Report is unchecked, the display will display

Not Monitored

.

This manual is related to the following products: