Grass Valley Kameleon HD Multi-Function Modules v.3.2.0 - Manual (Page 35)

KAM-HD-MULTI—Instruction Manual 35
Configuration and Adjustments
Status and Identification Header
Each configuration web page has a Status and Identification Header
reporting various status and configuration items on the module
(
Figure 14 ).
Figure 14. Status/ID Header
Status LED Icon
The Status LED icon reports communication status for the frame slot and is
a link to the module Status web page where Warnings and Faults are dis-
played.
LED colors indicate:
• Green = Pass – no problems detected
• Yellow = Configuration error warning
• Red = Fault condition detected
Identification Header
The following module status items are reported in the header:
• Model and Description are read-only generated by the module.
• Frame Location is defined on the 2000 Series Kameleon Frame Configura-
tion web page.
• Slot number reports the module’s location in the frame.
• Input Video Standard reports the input video type and rate selected on the
System Config web page.
• Input Video reports the status of the video input to the module.
• Output Timing Source reports the output timing source (Frame Reference
or Input) chosen on the System Config web page.
• Split Screen status is reported ( Enabled or Disabled ) as set on the System
Config, Color Correction, or HD and SD Video Proc Amp web pages.
• Last Recalled E-MEM reports the last E-MEM configuration recalled.
• Down Converter Output Line Rate – not applicable in this application.