Grass Valley Kameleon HD Multi-Function Modules v.3.2.0 - Manual (Page 66)

66 KAM-HD-MULTI—Instruction Manual
Kameleon HD Links and Web Pages
Audio Input Status Web Page
Use
this
link
Use the Audio Input Status web page to see the status of each available
audio input. The Audio Input Select web pages for each of the possible
audio input and output configurations are shown in the following figures:
• 8 inputs/0 outputs – Figure 36 on page 67
• 4 inputs/4 outputs – Figure 37 on page 68
• 0 inputs/8 outputs – Figure 38 on page 68
Audio Status
The Audio Input Status web page provides the following status reporting
items for each available audio input:
• Input Stream Name – this name is based on the name of the video input
and the AES inputs on the I/0 Config web page. Default Factory names
are shown in the example.
• Signal Present status – reports signal present status (Present or Not
Present) for both de-embedded and AES audio input streams.
Note Audio input status is only reported on the main Status web page when an
input has been selected for use on the Audio Input Select web page.
• Mode – reports audio mode (20 or 24 bit).
• Audio Mode – shows the audio mode (Audio or Non-Audio).
• Async Audio – reports the audio sync status (Sync or Async).
• Emphasis – reports whether audio signal has Emphasis (On or Off).
• AES Errors Detected – reports any errors detected since the last time the
error status was cleared (Errors or None).
Note If AES errors are detected, each input can be reset by pressing the corre-
sponding Reset button or reset all audio inputs using the Reset All button.