Grass Valley Kameleon HD Multi-Function Modules v.3.2.0 - Manual (Page 52)

52 KAM-HD-MULTI—Instruction Manual
Kameleon HD Links and Web Pages
Module Configuration Web Pages
Module configuration and monitoring is provided for the following HD or
SD video and audio functions (depending on video input type and audio
configuration setting) with the web browser GUI or control panel interface:
• HD or SD Video In ( page 53 )
• HD or SD Frame Sync ( page 54 )
• HD or SD Color Correction ( page 58 )
• HD or SD Video Proc ( page 60 )
• HD or SD MUX ( page 62 )
• SD Video Out ( page 65 )
• Audio Input Status ( page 66 )
• Audio Input Select ( page 69 )
• Audio Sync ( page 72 )
• Audio Processing Select ( page 74 )
• Audio Gain ( page 75 )
• Audio Channel Pairing ( page 77 )
• Audio Proc ( page 79 )
• AES Outputs ( page 81 )
Note Presence of some of the web pages listed above depends on module type and
system configuration. HD or SD video input type is set on the System Config
web page.
A summarized list of all control parameters and default values is given in
a Configuration Summary table on
page 25 .
Use the Defaults button on the bottom left of the configuration web pages to
return the values on that page to the defaults listed in the Configuration
Summary table.
Note Pressing the Defaults button on the System Config web page will reboot the
module as it resets the Input Type. Refer to
System Config Web Page on
page 47 .
Select the Previous, Functional View , or Next links on the bottom of each config-
uration web page to navigate to the next function or use the links on the left
of the web page. Return to the
Functional View at any time for configuration
flow or to see where the control is in the block diagram for the module.