System requirements – Grass Valley Kameleon HD Multi-Function Modules v.3.2.0 User Manual
Page 10
10
KAM-HD-MULTI—Instruction Manual
System Requirements
•
Color bars test signal generator,
•
Audio inputs and outputs on the rear modules are configurable as one
of the following:
•
8 inputs/0 outputs
•
4 inputs/4 outputs
•
0 inputs/8 outputs
•
Up to eight streams of input audio selectable for synchronization, then
multiplexed into the output video stream and/or sent to available AES
audio outputs on the rear module,
•
Four audio preset E-MEMs for auto setup of configuration,
•
Four streams of the selected audio may be paired and processed for
multiplexing into the output audio stream and/or sent to available AES
audio outputs,
•
Audio Disruption Processing to remove possible audio disruption from
the AES stream when video is switched upstream,
•
Dolby E bypass,
•
Newton Modular Control Panel interface,
•
NetConfig support, and
•
SNMP support – remote monitoring.
System Requirements
Operation of the Kameleon HD modules in 2000 Series frames has the fol-
lowing hardware and software requirements:
•
Modules must be installed in a 2000T1DNG or 2000T3DNG Kameleon
2000 Series frame containing a 2000GEN module.
Existing Kameleon frames can be upgraded with the necessary
modules and software for proper operation. Contact your sales repre-
sentative for more information.
•
The frame must have a 2000NET module with assembly number
671-5231-01 or later running software version 4.0.0 or later.
•
KAM-HD-MULTI Function operation requires a Kameleon HD module
with assembly number 671-6514-20.
•
The dual height KAM-HD-MULTI-UR Rear (
for
unbalanced audio inputs) or KAM-HD-MULTI-BR Rear (
for balanced audio inputs) is required for this module.
Note
If the wrong rear module is installed, the module will not be operable.