Input video, System config, System config web page – Grass Valley Kameleon HD Multi-Function Modules v.3.2.0 User Manual
Page 47
KAM-HD-MULTI—Instruction Manual
47
Kameleon HD Links and Web Pages
System Config Web Page
Use
this
link
The System Config web page (
) provides the following
system configuration controls:
•
Selection of the SD or HD input video type and rate for the module.
•
Enabling or disabling all HD and SD video processing, including color
correction or enable a color bars output test signal.
•
Selection of an output timing source.
•
Enabling or disabling of the split screen function and screen position for
comparing the input video to the processed video. This function is also
on the HD and SD Video Proc and Color Correction web pages.
Input Video
Select the desired video input type and rate from the
Input Type
radio buttons
and
Input Rate
pulldowns. Refer to
for a complete list of
available input types and rates.
Note
Pressing the Defaults button or changing the Input Type from HD to SD on
the System Config web page or with an E-MEM recall will cause the module
to reboot. It will take approximately 30 seconds to re-initialize. During this
time a Wait Page (
) will appear. Wait for the operation to complete
then select the Refresh button to update the web page.
Figure 24. Wait Page
Refresh button