Grass Valley K2 Media Client Service Manual Nov.18 2008 - Manual (Page 71)

July 28, 2008 K2 Media Client Service Manual 71
Creating a recovery disk image CD set
Creating a recovery disk image CD set
Do the following at the local K2 Media Client or the Control Point PC to create a disk
image of the entire system drive and store the disk image on a set of CDs. On the K2
Media Client, the disk image includes the C:, D:, and E: partitions:
1. Make sure that media access is stopped and that the K2 Media Client on which you
are working is not being used.
2. If you have not already done so, connect keyboard, monitor, and mouse to the K2
Media Client or the control point PC.
3. Insert the Recovery CD and restart the machine.
The machine boots from the disc. The Acronis True Image program loads.
4. At the startup screen, select True Image (Full Version) .
The Acronis True Image program loads.
The Acronis True Image main window appears.
5. In the Acronis True Image main window, click Backup .
The Create Backup Wizard opens.
6. On the Welcome page, click Next .
The Select Backup Type page opens.
7. Select The entire disk contents or individual partition and then click Next .
The Partitions Selection page opens.
8. Select Disk 1 . On the K2 Media Client, this selects the System (C:), the Database
(D:), and the Backup (E:) partitions. Click Next .
The Backup Archive Location page opens.
9. In the tree view select CD-RW Drive (F:) and then enter the name of the image file
you are creating. To create the file name for a K2 Media Client, use the K2 Media
Client hostname and the date. Name the file with the .tib extension. For example,
if the hostname is K2Client1, in the File name field you would have
F:\K2Client1_20051027.tib . Click Next .
The Backup Creation Options page opens.
10. Do not change any settings on this page. Click Next .
The Archive Comment page opens.
11. If desired, enter image comments, such as the date, time, and software versions
contained on the image you are creating. Click Next .
The “…ready to proceed…” page opens.
12. Remove the Recovery CD and insert a blank CD.
13. Verify that you are creating an image from Disk 1 and writing to the CD-RW Drive
(F:). Click Proceed .
The Operation Progress page opens and displays progress.
14. Remove and insert CDs as prompted. As you remove each burned CD make sure
you label it correctly to show the sequence of CDs.