Grass Valley K2 Media Client Service Manual Nov.18 2008 - Manual (Page 132)

132 K2 Media Client Service Manual July 28, 2008
Chapter 5 Removing and replacing FRUs
Remove Type II or Type III motherboard
NOTE: On the Type II or Type III motherboard, the CPU is in slot 2.
DVD
drive
Power 1
CPU fan
12 volt
power
RS-422
boards
(Not present
with Type II)
SCSI interface
board (this cable
not present on
older systems)
Disconnect cables 1
1 2 3
Verify position of
video jumper
(Pins 2 & 3)
Refer to procedures for individual FRUs for cabling detail
Standby
switch
PCI slot
Jumper
(JP4)
Red Black
Front USB
(connects to SCSI
interface board)
Continue with step on next illustration 2
Continue with step on next illustration
Loosen heatsink screws in
the sequence shown 2
Gently wriggle the heatsink
to loosen it from the CPU 3
Remove the heatsink from
the CPU socket 4
5
3 1 2 4