Grass Valley iControl Solo v.6.00 - Manual (Page 67)

Installing IC-USB
This appendix provides instructions on installing the IC-USB device.
Key Concepts
IC-USB
The IC-USB device is a USB-to-RS-422 converter. It is used to establish communication
between your PC or laptop, and serial devices such as the Quartet 2 and Symphonie Miranda
Imaging Series housing frames.
IC-USB Driver
The IC-USB driver is installed automatically with the Miranda iControl Solo software. When you
connect the IC-USB device to your PC or laptop, Windows will automatically detect the new
hardware and associate it with the IC-USB driver.
Detailed Directions
Connecting the IC-USB Device to a PC or Laptop
To connect the converter to your PC or laptop
1. Plug the Type A (flat) connector end of the USB cable into the USB port located in the back
of your PC.
2. Plug the Type B (square) end of the USB cable into the IC-USB device.
Connecting the IC-USB Device to a Miranda Quartet 2 Frame
To connect the converter to a Miranda Quartet 2 frame
1. Connect the IC-USB device’s DE-9 connector to the supplied RJ-45-to-DE-9 female adapter.
2. Connect one end of the supplied Ethernet cable to the RJ-45-to-DE-9 female adapter, and
the other end to one of the RJ-45 ports in the back of the Quartet 2 frame:
IC-USB connected to a Miranda Quartet 2 frame