Grass Valley iControl Solo v.6.00 - Manual (Page 42)

Using iControl Solo
Specifying a Location for Saving Loudness Data
38
To specify a location for saving loudness data
1. In Loudness Logger, select the loudness source.
2. Click Settings.
3. In the Loudness Logger Settings window, click the elipsis button to browse for the
location in your local file system where you would like to save loudness data.
4. Click Apply.
If you chose a valid path, the Success message appears.
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• The PC running iControl Solo is connected to a device which is streaming loudness
values, such as a Kaleido-Solo.
• You have opened iControl Solo (see page 31 ).