Grass Valley iControl Supported Devices V.2 - Manual (Page 77)

iControl
Supported Device Reference Guide
69
System Bitrate Text/Signal systemBitrate System Bitrate Of DVBS/S2
Valid Bitrate Text/Signal validBitrate Valid Bitrate Of DVBS/S2
Packet Length Text/Signal packetLength Packet Length Of DVBS/S2
Signal Strength Statustext/Signal signalStrength Strength Of Signal. If signal strength is inferior
than LBandLevelThreshold param, or unknown,
then the status is set to
CRITICAL .
ber Text/Signal ber BER Of Signal
snr Text/Signal snr SNR Of Signal
DownLink Frequency Text/Signal downlinkFreq DownLink Freq Of Signal. Range (0..100000)
Local Frequency Text/Signal localFreq Local Freq Of Signal. Range (0..100000)
Symbol Rate Text/Signal symbolRate Symbol Rate Of Signal. Range (1..999999)
Standard Text/Signal standard Mode Of DVBS/S2. Can be "dvb-s" or "dvb-s2"
Polarize Text/Signal polarize Polarize Of Signal. Can be "horizontal", "vertical" or
"off"
lnb 22khz Statustext/Signal lnb22khz LNB 22kHz Of Signal. "on" or "off".
Signal Status Statustext/Signal signalStatusOutput "Print Choose Of Output Status"."on" or "off".
Signal Monitor Statustext/Signal signalMonitor Signal Monitor. "on" or "off".
Block Stream Statustext/Signal blockStream Block Stream. "on" or "off".
Signal Level
Threshold Text/Signal sigalLevelThreshold SignalLevel Threshold.
Range (1..10)
Alarm Enable Statustext/Signal alarmEnable DVBS/S2 alarm OnOff. "on" or "off".
--- Input ASI alarms ---
All the following are elements related to signal input with type ASI. All those elements are display in
a subfolder named ‘Input ASI’.
LockStatus StatusText/Signal asiInLockStatus ASI Input Status. "unlock" (Critical error) or "lock"
(nominal case).
System Bitrate Text/Signal asiInSystemBitrate System Bitrate
Valid Bitrate Text/Signal asiInValidBitrate Valid Bitrate
Packet Length Text/Signal asiInPacketLength Packet Length. "packet188" or "packet204"
Input Enable StatusText/Signal asiInEnable Input OnOff. "on" or "off".
Input alarm enable StatusText/Signal asiInAlarmEnable Alarm OnOff. "on" or "off".
Health monitoring alarms (Continued)
Alarm name Type MIB point Further details