Harris (leitch) – Grass Valley iControl Supported Devices V.2 User Manual
Page 37
iControl
Supported Device Reference Guide
29
Certain parameters may be passed to the plug-in, as follows:
Harris (Leitch)
program Xc Not Descrambled
Text/Status
Yes
cam Packet Loss
Text/Status
Yes
cam Zero Bitrate
Text/Status
Yes
cam Descrambling Failure
Text/Status
Yes
satellite Per Too High
Text/Status
Yes
cam Input Overflow
Text/Status
Yes
embedded Descrambler Input Overflow
Text/Status
Yes
input Bitrate Overflow
Text/Status
Yes
Parameter
Description
alarmPath
Force a Path where to create the plugin alarms
pollInterval
Fast poller interval in seconds. Overwrite the default interval of 20 seconds.
retries
If an SNMP request timeout, this defines the number of retries to be performed. Default is 1.
timeout
Delay in seconds before declaring a timeout in the current SNMP request.
uniqueID
An extra identifier to be assigned to the plugin to differentiate its alarms from the other plugin
of the same type. The uniqueID should be part of uri.
readCommunity
SNMP read community string. Use for SNMP polling.
lightweightDriver
Set the plugin to monitor only criticals alarms. Default is false.
signalForcedSeverity
Text indicating the forced severity for service alarms. Possible values: CRITICAL, MAJOR,
MINOR
healthForcedSeverity
Text indicating the forced severity for health alarms. Possible values: CRITICAL, MAJOR, MINOR
Ordering information
Hardware
New in iControl
version
GSM plug-in name
Order number
4.30
SNMP — Harris IconStation
IC-SNMP-148
"NetPlus M400 Integrated
Receiver/Decoder"
4.30
SNMP — Harris NetPlus M400
IC-SNMP-156
SNMP — Harris NetVx Frame
IC-SNMP-157
SNMP — Harris
Panacea
IC-SNMP-096
(Continued)
Alarm name
Type
Optional?
Further details