Grass Valley iControl Supported Devices V.2 - Manual (Page 43)

iControl
Supported Device Reference Guide
35
RS-1100
International Datacasting’s RS-1100 is a 75-ohm broadband transfer switch that offers
broadcasters and teleport operators the ability to obtain higher signal reliability in an efficient
1-RU, half width device. In the case of a fault, the RS-1100 performs a switch to keep a system
on the air.
The plug-in supports two types of alarms: Health alarms and Signal alarms , as follows:
Data Tx Bytes networkDataTxBytes
Data Tx Errors networkDataTxErrors
Data Tx Drops networkDataTxDrops
Mnc Speed networkMncSpeed
Mnc Duplex networkMncDuplex
Mnc Rx Packets networkMncRxPackets
Mnc Rx Bytes networkMncRxBytes
Mnc Rx Errors networkMncRxErrors
Mnc Rx Drops networkMncRxDrops
Mnc Tx Packets networkMncTxPackets
Mnc Tx Bytes networkMncTxBytes
Mnc Tx Errors networkMncTxErrors
Mnc Tx Drops networkMncTxDrops
buffer overrun bufferOverrunAlarmStatus Notification sent out when the buffer overrun
alarm changes status
Alarm name Type Polling or
trap?
MIB point Further details
--- Health monitoring alarms ---
Device
Communication Status/health Poller sysUpTime
(RFC1213)
Device communication alarm set by receiving a
successful/failed event in the poller
(Continued)
Alarm name MIB point Further details