Grass Valley iControl Supported Devices V.2 - Manual (Page 58)

Supported Devices
Motorola
50
DM6400 CherryPicker (formerly Terayon DM6400)
The DM6400 is part of the Motorola CherryPicker® line of digital video processing systems for
networking, distributing and processing both standard definition (SD) and high definition
(HD) services. It provides various digital video applications including grooming of custom
channel lineups, rate shaping and statistical remultiplexing, and localized digital ad insertion.
DSR-4410
The Motorola DSR-4410 is a 1RU commercial satellite receiver that can output either NTSC or
PAL video formats, automatically matching a programmer’s video format. Variable front-end
and bypass capabilities make it suited for network conversion from analog to digital. Full VBI
reinsertion on lines 10 - 22 for SID/AMOL I & II and NABTS is standard on the DSR-4410, which
is equipped with DVB-ASI input and output.
DSR-4440
This device is a Commercial Integrated Receiver/Decoder (IRD). It is a Multi-Format Digital
Satellite Receiver for Cable Programmers and Operators.
The plug-in supports three types of alarms: Health alarms , Text alarms , or Bitfield alarms , as
follows:
Health monitoring alarms
Alarm name Type MIB point Polling
or
trap?
Further details
DC Board Status Status dcBoardStatus (DSR4440) Poller Indicates the status of DC board
i.e. Active or Not Responding
Device Communication Status sysUpTime (RFC1213) Poller Device communication alarm set
by receiving a successful/failed
event in the poller
Device Restart Status sysUpTime (RFC1213) Poller Device power cycle alarm. Status
determined comparing
subsequent polling of the system
up time variable
Flash Available Status/Text flashAvail (DSR4440) Poller Gives the size of the free Flash left,
expressed in B(Bytes) that is
available for the operating system,
the threshold is defined based on
the 20% of the total size of the
flash