Grass Valley Aurora Ingest v.6.1 - Manual (Page 58)

48 Aurora Ingest System Guide May 2007
Chapter 3 Using Aurora Ingest - Scheduler
Using filters
If you have a large number of feeds, it can sometimes be tedious trying to locate the
particular type of event, or channel, and so on, that you want to view. You can use
filters to view the channels that you are particularly interested in.
To set up a filter, follow these steps:
1. In Scheduler, select Tools | Schedule Manager | Filter . The Add Filter dialog box
displays.
2. Name the filter and select the criteria you want to use to filter.
• Event Type—Select the event type from the drop-down list. You can select all
or select a particular event type such as ENPS, Feed, VTR or VTR Ingest
Reservation.
• Source Type—Select the source type that you need to filter. You can select all
or select a particular source such as CompuSat or a router.
• Router Source—Select the particular source if it’s applicable for your filter.
• Channel—Select the channel that you recorded the feeds into. You can select all
or select the specific channel that you need to filter.
• Owner—Select all or a particular user of Aurora Ingest that had recorded the
feeds. Names that appear on the drop-down list are according to user
administration setup in Aurora Ingest - Server. For more information on user
administration setup, see
“User Administration for Aurora Ingest” on page 32 .
3. Click Add to add the filter to Scheduler.
Once the filter has been added, you can select it from the drop-down list on the
Scheduler menu.