Grass Valley Aurora Ingest v.6.1 - Manual (Page 46)

36 Aurora Ingest System Guide May 2007
Chapter 3 Using Aurora Ingest - Scheduler
Channel Columns
Each channel window displays information about the event:
Crash Recording
You can crash record when you want to record an event immediately.
To crash record:
1. Select the channel where you want to record the event. If you do not select a
channel, Scheduler will automatically assign a channel.
2. Select the router source for the recording by selecting from the router source combo
box.
3. If desired, enter a name for the clip. If not, Aurora Ingest application will
automatically name each clip using the prefix you set when you configured each
channel. Refer to
“Configuring Channels” on page 22 .
4. Click Record .
The clip cues, and after a short time the clip begins recording.
Column Description
Clip title The name of the event placeholder.
Router source The router source selected for this event.
Status The current status of the event:
Ready = The event is ready to record.
Cueing = The event is preparing to record.
Recording = The event is currently recording to the server.
Done = The event has finished recording.
Failed = The event could not record. Check the Error Message field for more
information.
Elapsed = The time for the event to record has passed. The status color is gray
as the elapsed time is passing, and turns to black when the time has passed.
Start time The beginning and ending time for the event.
End time
Location The name of the folder where the clip resides in the database.
Channel The channel that had been selected for the event
Owner The user who created the clip.
Error Message Any error message describing why the event was not recorded to the server.