Grass Valley Aurora Ingest v.6.1 - Manual (Page 41)

May 2007 Aurora Ingest System Guide 31
Configuring RMI
Configuring RMI
The Aurora Ingest - RMI application is configured in the RMI application.
Once the “System Requirements” have been met, you can use this dialog box to
configure Aurora Ingest - RMI.
1. Enter the IP address or computer name of the Aurora Ingest Server.
2. Specify the removable media device or devices.
3. Specify the import and conversion settings.
4. Select local or shared storage, and browse to the VibrintAVFiles location.
• Prompt for tape ID - this feature lets you give the disk and all of the clips useful
names right up front.
• Use Global Tape ID for P2 - select this if you want to use global tape ID when
ingesting from Panasonic P2.
• Automatically select clips upon disk discovery - use this feature if it’s better for
your workflow to ingest the clips then select or de-select individual clips.
5. If you are configuring for HD Infinity files or HD XDCAM files, you also need to
specify the conversion settings.
• Chroma Format - select the chroma format from the drop-down list
• Bit Rate - set the appropriate bit rate needed
6. Click OK .