Grass Valley Aurora Ingest v.6.1 - Manual (Page 30)

20 Aurora Ingest System Guide May 2007
Chapter 2 Installing and Configuring Aurora Ingest
3. Click Next and the setup wizard will search your network to locate the DIGI One
SP device server.
4. Select the device server according to its specific MAC address.
5. Take note of the device IP address and click Next .
6. In the Network Settings section, select IP and enter the IP address that had been
retrieved by the setup wizard.
7. In the COM Port Settings section, set the number of ports to 1 and select the
appropriate COM port from the Starting COM drop down list. This will be your
virtual COM port.