Grass Valley Aurora Ingest v.6.1 - Manual (Page 52)

42 Aurora Ingest System Guide May 2007
Chapter 3 Using Aurora Ingest - Scheduler
drop-down calendar. Move to a different month using the arrows at the top of
the calendar.
• Start Time—Enter the time you want the recording to start, using the format
hour:minutes:seconds .
NOTE: When scheduling two events back-to-back, a space of 10 seconds is required
from the stop of the first record to the start of the second record. In order to
compensate for this, it is recommended that the default record duration reflect a stop
time 10 seconds prior to the rounded duration (e.g., 00:59:50 for a 1 hour record).
• Stop Date—Select the date you want the recording to end on using the
drop-down calendar.
• Stop Time—Enter the time you want the recording to end, using the format
hour:minutes:seconds .
• Recurring—Check this box if you want this scheduled event to occur more than
once. See “Adding Recurring Events” on page 44 for instructions.
4. Click Add .
The scheduled event is added to Scheduler with a Ready status.
Adding New Events from CompuSat
To record events from a CompuSat-controlled satellite dish, you have to ensure that
the CompuSat system component is connected to Aurora Ingest Server. See
“Configuring System Settings” on page 13 for configuration instructions.
Make sure that the CompuSat system indicator is green to signify that the component
is connected on the System Components display of Aurora Ingest Server.
To add a new event:
1. Select the channel where you want to record the event. If you do not select a
channel, Scheduler automatically assigns a channel.
2. Click Add Event .
The Add Event dialog box appears. Note that there is an additional CompuSat tab
in the dialog box.