Grass Valley Aurora Ingest v.6.1 - Manual (Page 34)

24 Aurora Ingest System Guide May 2007
Chapter 2 Installing and Configuring Aurora Ingest
Configuring Aurora Ingest - Scheduler (Feed)
Configuring Scheduler in the Aurora Ingest - Scheduler application
After you have configured Scheduler in the Aurora Ingest - Server application, you
need to configure the options in the Aurora Ingest - Scheduler application.
If you have the optional Hauppage WinTVGo video capture card installed in your
scheduler machine and a router configured in your system, you will need to define the
destination of the router connected (via digital to analog converters, if needed) to your
video capture card.
Setting Description
Default Clip Name Specify the default clip name.
Default Record Location Enter the default location for any scheduled record
event.
Default Duration Enter the default duration for any new feed event
you schedule. (00:59:50 by default).
To easily schedule back-to-back records, adjust
the default duration by 10 seconds in order to avoid
a recording conflict. For example, for a 1 hour feed
duration, set the default duration to 00:59:50.
Default Crash Location Enter the default location for any un-scheduled,
i.e. crash record event. Once specified, all crash
records will go to the same folder name on all
media servers.
Default Crash Duration Enter the default duration for any un-scheduled
record event.
Timecode Source Select the timecode source from the drop-down
list: System Time, LTC, or VITC