Grass Valley Aurora Ingest v.6.1 - Manual (Page 27)

May 2007 Aurora Ingest System Guide 17
Configuring Routers
5. Click Connect .
6. You can also enable RS-422 switching, which enables you to switch between
VTRs for each channel without having to swap the RS-422 cables manually, as
Aurora Ingest will switch the RS-422 port. Aurora Ingest switches video from the
VTR to the video capture card whether RS-422 switching is enabled or not. For
more information on RS-422 switching, see
“About RS-422 switching” on
page 21 .
7. Select 0 (zero) for the video level if video is the first level in your router control
system, 1 if it is the second level and so on. Select the level from the drop-down list.
8. Click Apply to save changes.
9. Click the Configure Router Sources button. Aurora Ingest connects to the router and
queries the list of sources. The Configure Router Sources dialog box displays,
showing the available sources.
10. In the Feed window, you can enable the router sources that are connected to the
CompuSat satellite feed. You can also rename the router source in the “Source
Name” column and choose a default location in the Media Server for the feed to
record to.
NOTE: Once you have enabled the Feed router sources, a list of enabled Feed router
sources is available in the router source list of the Add Feed dialog box in the
Scheduler application.
11. Click OK to exit the Configure Router Sources dialog box. The settings will take
effect once you click Apply in the Options dialog box.