Grass Valley Aurora Ingest v.6.1 - Manual (Page 51)

May 2007 Aurora Ingest System Guide 41
Adding New Events
3. Fill out the information for the event you are scheduling:
• Template—Select a template from the drop-down list.
Templates save information such as clip location and recording channel so that
you can save time on repeated ingests. See
“Creating a Template” on page 46 .
• Clip Title—Enter a name for the scheduled event, if you want to.
If not, Aurora Ingest automatically names each clip using the prefix you set
when you configured each channel. See
“Configuring Channels” on page 22 .
• Assignment List Manager—Click Assignment List Manager to link this event to
a Aurora Playout rundown. See “Linking Clips to Aurora Playout Placeholders”
on page 65 for details.
• Location—If desired, select a different record location for the event.
• Router Source—Select the source to record from in the drop-down list.
• Gang Roll—Click Gang Roll to select several router sources to start recording
simultaneously as can be seen in the window below:
• Start Record Now—Check this box to start a recording as soon as you click OK .
If you check this box, you need to provide an ending time for the record. Can be
used with Open Ended Record.
• Open Ended Record—Check this box if you want a recording to continue until
you manually stop it. You provide a start time for the record. Can be used with
Start Record Now.
• Start Date—Select the date you want the recording to start on using the