Grass Valley Aurora Ingest v.6.1 - Manual (Page 35)

May 2007 Aurora Ingest System Guide 25
Configuring Aurora Ingest - Scheduler (Feed)
1. In Aurora Ingest - Scheduler, select Tools | Options .
2. If you want to use an Aurora Ingest Server that differs from one listed in
Tools | Options in the Aurora Ingest - Server application, you need to specify the
server here. In the System tab, specify the Aurora Ingest Server.
3. Click Apply .
4. Select the Video Viewer tab.
5. Check the Enable video viewer box.
6. If desired, check the 16:9 box.
7. If using a router, select the router destination from the drop-down list. If no router
has been configured, this field will be grayed out. To configure a router, see
“Configuring Routers” on page 16 .
8. If you have installed the video capture card, select the device in the capture device
drop-down list.
9. Click OK .