H3C Technologies H3C SecPath F100-C-EI - Manual (Page 73)

Installation Manual
H3C SecPath F100-C-EI Firewall
Chapter 5 Maintaining Software
5-23
1) Enter the Boot menu, and select 7 to enter the Boot ROM
operation menu.
2) Select
3
in the Boot ROM operation menu to restore the
extended segment of the Boot ROM program from the flash
memory.
Restore Extended Segment, are you sure?[Y/N]
Type y to begin the restoration.
If the restoration attempt is successful, the system displays:
Writing to Boot ROM.Please wait...
Restoring Boot ROM program successed!
3) When the Boot ROM operation menu appears again, type 5
to return to the Boot menu. Type 9 to restart the firewall to
complete the restoration.
5.7 Recovering/Changing Password
5.7.1 Recovering/Changing User Password
If you forget your password, you can enter the system by ignoring
the system configuration.
Follow the steps to enter the system without password:
1) Enter the Boot menu, and select 5.
The system displays:
Start up and ignore configuration, are you sure?[Y/N]y
Set Success!
This indicates the system has been set successfully.
2) When the Boot menu appears again, type 9 to restart the
system.