H3C Technologies H3C SecPath F100-C-EI - Manual (Page 62)

Installation Manual
H3C SecPath F100-C-EI Firewall
Chapter 5 Maintaining Software
5-12
Enter 1 to configure the network interface parameters (including
the interface in use and the IP address and subnet mask of the
interface) and the TFTP server parameters (including the IP address
of the Ethernet interface on the TFTP server and the file name of the
application program).
Change Download parameter
Download device :WAN
Download file(Max 60 char) :update.bin
IP address of WAN :192.168.1.1
Subnet mask for WAN :255.255.255.0
IP address of the server :192.168.1.2
IP address of the gateway :192.168.1.10
Caution:
z
The upgrade should be performed through interface WAN on the
firewall.
z
The item “IP address of the server: [192.168.1.10]” must be set to
the IP address of the TFTP server connected to the Ethernet
interface on the firewall.
z
You are recommended to configure the IP addresses of the TFTP
server network interface and that of interface WAN on the firewall
into the same network segment.
Step 3: Confirm configuration parameters.
Saving the net configuration, are you sure?[Y/N]