H3C Technologies H3C SecPath F100-C-EI - Manual (Page 58)

Installation Manual
H3C SecPath F100-C-EI Firewall
Chapter 5 Maintaining Software
5-8
6) After completing the download, the system begins writing
data to the flash memory and then displays the following
information on the terminal interface, indicating the
completion of the download:
XMODEM download completed.Packet length 6560000 bytes.
System file length 4142973 bytes,http.zip file length
2416958 bytes.
Writing file flash:/system to FLASH...
Please wait, it may take a long time
#######################################################
#
Writing into Flash Succeeds.
Writing file flash:/http.zip to FLASH...
Please wait,it may take a long time
#######################################################
#################
Writing into Flash Succeeds.
Please use 9600 bps.Press key to exit to Main Menu.
At this prompt, change the Bits per second setting back to 9600
in HyperTerminal, and press Enter. The system starts up normally.
5.2.2 Upgrading the Boot ROM Program
1) Enter the Boot menu (see section 5.1 “Boot Menu” on page
5-1) and select 7 to enter the Boot ROM operation menu.