3 safety recommendations against electricity, 3 tools, meters, and instruments, I. tools – H3C Technologies H3C SecPath F100-C-EI User Manual
Page 28: Ii. cables, Iii. meters and instruments, 3 safety recommendations against electricity -8, 3 tools, meters, and instruments -8, Ensure that the firewall is grounded well, An uninterrupted power supply (ups) is recommended, Avoid maintaining the firewall alone with power on
Installation Manual
H3C SecPath F100-C-EI Firewall
Chapter 2 Preparing for Installation
2-8
2.2.3 Safety Recommendations against Electricity
z
Locate the switch of the power source so as to turn off the
switch in case of emergency during the device installation
and maintenance. Unplug the power cord of the device
when necessary.
z
Ensure that the firewall is grounded well.
z
Do not open or close the chassis cover with the device
powered on.
z
Ensure that the firewall interface cables are connected
correctly.
z
An uninterrupted power supply (UPS) is recommended.
z
Avoid maintaining the firewall alone with power on.
2.3 Tools, Meters, and Instruments
I.
Tools
z
Phillips screwdrivers
z
Flat-blade screwdrivers
z
ESD-preventive wrist strap
z
Static shielding bag
II.
Cables
z
PGND wire and power cord
z
Console cable
z
Optional cables
III.
Meters and instruments
z
HUB or LAN switch
z
Console terminal (or PC)