H3C Technologies H3C SecPath F100-C-EI - Manual (Page 52)

Installation Manual
H3C SecPath F100-C-EI Firewall
Chapter 5 Maintaining Software
5-2
Boot the firewall, and press Ctrl+B when the system displays
“Press Ctrl-B to enter Boot Menu”. The system then displays:
Please input Boot ROM password :
Caution:
z
To enter the Boot Menu, press Ctrl+B within three seconds after
the information “Press Ctrl-B to enter Boot Menu...” appears.
Otherwise, the system starts to decompress the program.
z
To enter the Boot menu after the firewall starts the program
decompression process, reboot the firewall.
Type the correct password and press Enter. (If no Boot ROM
password is configured, just press Enter. If you fail to enter the correct
password three times consecutively, the system will be halted. You
need to restart the firewall in this case.) The system displays the
following Boot menu.
5.1.1 Boot Menu of the Firewall
Boot Menu:
1: Download application program with XMODEM
2: Download application program with NET
3: Display file in flash
4: Delete file from flash
5: Start up and ignore configuration
6: Enter debugging environment
7: Boot ROM Operation Menu