H3C Technologies H3C SecPath F100-C-EI - Manual (Page 53)

Installation Manual
H3C SecPath F100-C-EI Firewall
Chapter 5 Maintaining Software
5-3
8: Do not check the version of the software
9: Exit and reboot
Enter your choice(1-9):
Note that:
z
To download an application program using XModem, see
section 5.2 “Upgrading Application and Boot ROM
Programs Using XModem” on page 5-4.
z
If option 5 is selected, the system starts up with the initial
configurations.
z
If option 8 is selected, the system ignores the software
version of the Boot ROM program, its extended segment,
and application program for backward compatibility. If you
fail to upgrade the software because the system decides
that you are using an “invalid version” even when the correct
version is used, you can use option 7 to ignore the version
check during a software upgrading. Note that this option
works only once when you select it. The system resumes
version check after you reboot the firewall.
5.1.2 Boot ROM Operation Menu of the Firewall
As mentioned earlier, you can select 7 in the Boot menu to enter
the Boot ROM operation menu as follows:
Boot ROM Operation Menu:
1: Download Boot ROM with XModem
2: Download Extended Segment of Boot ROM with XModem
3: Restore Extended Segment of Boot ROM from FLASH
4: Backup Extended Segment of Boot ROM to FLASH
5: Exit to Main Menu