Figure 5-5, Set up an upgrade environment through tftp -11 – H3C Technologies H3C SecPath F100-C-EI User Manual

Page 61

Installation Manual
H3C SecPath F100-C-EI Firewall

Chapter 5 Maintaining Software

5-11

Figure 5-5

Set up an upgrade environment through TFTP

2) Start the TFTP server

Start the TFTP server on the PC connected to the Ethernet

interface on the firewall and set the path for the file to be downloaded.

3) Configure the firewall

Step 1: Access the TFTP configuration status.

Start the firewall and enter the Boot menu (see section 5.1 ).

Select 2 to enter the Net Port Download Menu. The system displays
the following message:

Net Port Download Menu:

1: Change Net Parameter

2: Download From Net

3: Exit to Main Menu

Enter your choice(1-3):

Step 2: Configure TFTP parameters.