H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 146)

11-11
To do… Use the command… Remarks
Configure a login password password password
Required
By default, no login password is
configured.
Specify a file to be transferred
between the FTP server and the
FTP client
filename file-name
Required
By default, no file is specified.
Configure optional parameters
See Configuring Optional
Parameters for an NQA Test
Group Optional
z When you execute the put command, a file file-name with fixed size and content is created on the
FTP server. When you execute the get command, the device does not save the files obtained from
the FTP server.
z When you download a file that does not exist on the FTP server, FTP tests fail.
z When you execute the get command, use a file with a small size. A big file may result in test failure
due to timeout, or may affect other services for occupying too much network bandwidth.
Configuring HTTP Tests
HTTP tests of an NQA test group are used to test the connection between the NQA client and an HTTP
server and the time required to obtain data from the HTTP server. HTTP tests enable you to detect the
connectivity and performance of the HTTP server.
Configuration prerequisites
Before you start HTTP tests, configure the HTTP server.
Configuring HTTP tests
Follow these steps to configure HTTP tests:
To do… Use the command… Remarks
Enter system view system-view —
Enter NQA test group view
nqa entry admin-name
operation-tag
—
Configure the test type as HTTP
and enter test type view
type http Required
Configure the IP address of the
HTTP server as the destination
address of HTTP request packets
destination ip ip-address
Required
By default, no destination IP
address is configured.