H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 100)

7-8
To do… Use the command… Remarks
Extend the standard
linkUp/linkDown traps defined in
RFC
snmp-agent trap if-mib link
extended
Optional
Standard linkUp/linkDown traps
defined in RFC are used by default.
Configure the size of the trap
sending queue
snmp-agent trap queue-size size
Optional
100 by default
Configure the holding time of the
traps in the queue
snmp-agent trap life seconds
Optional
120 seconds by default
z An extended linkUp/linkDown trap is the standard linkUp/linkDown trap (defined in RFC) appended
with interface description and interface type information. If the extended messages are not
supported on the NMS, disable this function to let the device send standard linkUp/linkDown traps.
z If the sending queue of traps is full, the system will automatically delete some oldest traps to
receive new traps.
z The system automatically deletes the traps whose lifetime expires.
Displaying and Maintaining SNMP
To do… Use the command… Remarks
Display SNMP-agent system
information, including the contact,
location, and version of the SNMP
display snmp-agent sys-info
[ contact | location | version ]*
Display SNMP agent statistics display snmp-agent statistics
Display the SNMP agent engine ID
display snmp-agent
local-engineid
Display SNMP agent group
information display snmp-agent group
[ group-name ]
Display basic information of the
trap queue
display snmp-agent trap queue
Display the modules that can send
traps and whether their trap
sending is enabled or not
display snmp-agent trap-list
Display SNMP v3 agent user
information
display snmp-agent usm-user
[ engineid engineid | username
user-name | group group-name ] *
Display SNMP v1 or v2c agent
community information display snmp-agent community
[ read | write ]
Display MIB view information for an
SNMP agent
display snmp-agent mib-view
[ exclude | include | viewname
view-name ]
Available in any view