H3C Technologies H3C WX6000 Series Access Controllers - Manual (Page 104)

8-1
8
MIB Style Configuration
This chapter includes these sections:
z Overview
z Setting the MIB Style
z Displaying and Maintaining MIB
Overview
The H3C private MIB has two styles: the H3C compatible MIB style and the H3C new MIB style. In the
H3C compatible MIB style, the device sysOID is under the H3C’s enterprise ID 25506, and the private
MIB is under the enterprise ID 2011. In the H3C new MIB style, both the device sysOID and the private
MIB are under the H3C’s enterprise ID 25506. These two styles of MIBs implement the same
management function except for their root nodes. An AC is shipped with MIB loaded and the MIB style
may vary depending on the AC. To implement NMS’s flexible management of the AC, the AC allows you
to configure MIB style, that is, you can switch between the two MIB styles. However, you need to ensure
that the MIB style of the device is the same as that of the NMS.
Setting the MIB Style
Follow these steps to set the MIB style:
To do… Use the command… Remarks
Enter system view system-view —
Set the MIB style mib-style [ new | compatible ]
Optional
new by default
After changing the MIB style, reboot the AC to validate the change.
Displaying and Maintaining MIB
To do… Use the command… Remarks
Display the MIB style display mib-style Available in any view