H3C Technologies H3C MSR 3600 - Manual (Page 64)

56
3. Install a new air filter. For the installation procedure, see " Installing the router ."
To remove the slide rails, completely loosen the fastening screws of the slide rails.
To install new slide rails, see "
Installing the router ."
Figure 80 Removing slide rails
Replacing a CF card
CAUTION:
Execute the umount cfb0: command before you remove the CF card if the router is powered on.
To replace a CF card:
1. Press down the spring clip of the CF card cover and open the cover.
2. Press the CF card eject button of the CF card reader so that the eject button projects from the panel.
3. Press the eject button again to eject the CF card part-way out of the CF card reader, and then pull
the CF card out of the CF card reader.
Keep the removed CF card for future use.
Figure 81 Removing the CF card
4. Install a new CF card. For the installation procedure, see " Installing the router ."
If you do not install a new CF card, close the CF card cover.