H3C Technologies H3C MSR 3600 - Manual (Page 53)

45
• The console cable is correctly connected, the terminal or PC used for configuration has started, and
the configuration parameters have been set.
• If a CF card is used, verify that the CF card is in position.
• Make sure the installed HMIMs/MIMs are in position.
Powering on the router
1. Turn on the switch of the power supply system for the router.
2. Turn on the switch of the AC or DC power modules.
Displaying boot information
Power on the router, and you can see the following information:
System is starting...
Booting Normal Extend BootWare........
The Extend BootWare is self-decompressing....Done.
****************************************************************************
* *
* H3C MSR36-60 BootWare, Version 1.01 *
* *
****************************************************************************
Copyright (c) 2004-2012 Hangzhou H3C Technologies Co., Ltd.
Compiled Date : Sep 25 2012
CPU ID : 0x4
Memory Type : DDR3 SDRAM
Memory Size : 2048MB
BootWare Size : 1024KB
Flash Size : 8MB
cfa0 Size : 247MB
CPLD Version : 1.0
PCB Version : 2.0
BootWare Validating...
Press Ctrl+B to enter extended boot menu...
Loading the main image files...
Loading file cfa0:/msr36-cmw710-system-a0004.bin............................
.............Done.
Loading file cfa0:/msr36-cmw710-boot-a0004.bin...................Done.
Image file cfa0:/msr36-cmw710-boot-a0004.bin is self-decompressing..........
......Done.
System image is starting...
Startup configuration file does not exist.