H3C Technologies H3C MSR 3600 - Manual (Page 51)

43
Figure 60 Connecting a DC power cord for an MSR 36-40/36-60
Figure 61 Connecting a DC power cord for an MSR3600-51 router
Connecting an RPS power cord
The MSR 36-10 and MSR 36-20 routers support remote power supply (RPS). As an external power supply,
RPS can provide power supply for the device in case of power module abnormality. It enhances the
reliability of the device.
The router has a sticky label and a protective cover when shipped to protect the RPS receptacle.
To connect an RPS power cord:
1. Remove the sticky label.
2. Remove the screws on the protective cover with a screw driver to remove the protective cover, as
shown in the following figure:
3. Insert one end of the RPS power cord to the RPS receptacle on the router and fasten the screws on
the RPS power cord plug.
1 2
1 2