H3C Technologies H3C MSR 3600 - Manual (Page 18)

10
Installing the router
Installing an air filter
No air filter is provided with the router. Purchase one yourself. Only the MSR 36-40 and MSR 36-60
support air filters.
To install an air filter:
1. Face the left side (side of the inlet vents) of the router.
2. Install the upper and lower guide rails of the air filter to the chassis. Fasten the fastening screws on
the guide rails with a Phillips screwdriver. See
Figure 4 .
Figure 4 Installing the upper and lower guide rails
3. Push the air filter along the guide rails from the rear side of the chassis to the front.
Figure 5 Pushing the air filter along the guide rails
Mounting the router on a workbench
IMPORTANT:
•
Ensure good ventilation and 10 cm (3.94 in) of clearance around the chassis for heat dissipation.
• Do not place heavy objects on the router.