H3C Technologies H3C MSR 3600 - Manual (Page 54)

46
Line aux0 is available.
Press ENTER to get started.
Press Enter, and the following prompt appears:
You can now configure the router.
Examining the router after power-on
After the router is powered on, verify that:
• The LEDs on the front panel are operating correctly:
LED Status Description
PWR Steady green
The power module is supplying power
correctly.
SYS Slow flashing green The router is operating correctly.
• The configuration terminal displays information correctly. For local configuration, the configuration
terminal displays the boot information (see "
Displaying boot information ").
• If you press Enter as prompted after system bootup, the router is ready to configure.
Configuring basic settings for the router
After the router is powered on for the first time, configure the basic settings for the router. For more
information, see H3C MSR Routers Fundamentals Configuration Guide (V7) and H3C MSR Routers
Fundamentals Command Reference (V7).