H3C Technologies H3C MSR 3600 - Manual (Page 41)

33
Figure 41 Installing a CF card
Logging in through the console port
Connecting a console cable
You can log in to the MSR 36-10/36-20/36-40/36-60 router through the console port by using a
console or USB console cable at the first login. You can log in to the MSR3600-28/3600-51 router
through the console port only by using a console cable.
IMPORTANT:
When you connect a PC to a powered-on router, connect the RJ-45 connector to the router after
connecting the DB-9 connector of the console cable to the PC.
To connect a console cable:
1. Plug the DB-9 female connector to the serial port of the configuration terminal.
2. Connect the RJ-45 connector to the console port of the router.